Master Bracket & Screw Guide
Savance Workplace
Wondering what screw or bracket goes to what? Use this guide for help, and click the images for a larger view of each component. Still have issues? Reach out and we’re happy to assist.
Brackets
SW-KIOSK-MASTER-BRACKET
Description:
Master Bracket for connection to 75 or 100 VESA mounts (X4 M4x8 screws per Master Bracket).
Mount:
75 or 100 VESA
Used with:
Master Bracket System
SW-KIOSK-MB-PROX-BARCODE
Description:
Bracket with a 30 degree bend for Master Bracket System
Mount:
Bottom Mount
Used with:
Barcode Scanner, Prox Reader
SW-KIOSK-MB-SIDE-PROX-TEMP
Description:
Bracket with two 90 degree bends for Master Bracket System
Mount:
Side Mount (left or right)
Used with:
Prox Reader, Face Scanner, Temperature Scanner
SW-KIOSK-MB-CAMERA-UVC
Description:
Bracket with a 90 degree bend for Master Bracket System
Mount:
Top Mount
Used with:
Camera, UVC
Screws
SW-WING-NUTS
Description:
Wing nut to attach brackets to master bracket (x2 per accessory bracket)
Used with:
Brackets
SW-SCREWS-FACE-SCANNER
Description:
#6-32 x 3/8 in machine screws with nuts. #6 x 9/16 in fender washers (x2 per scanner)
Used with:
Face Scanner, Temperature Scanner
SW-SCREWS-BARCODE-READER
Description:
M3 Phillips countersunk pan head screws with type B flat end (x2 per barcode reader)
Used with:
DS457 Barcode Reader
SW-SCREWS-PROX-READER
Description:
M3 (5 or 6) Phillips screws with Type A sharp point end (x2 per prox reader)
Used with:
PcProx Badge Reader
SW-BOLT-CAMERA
Description:
1/4″ bolt with hand crank to attach the kiosk camera to the kiosk (x1 per camera)
Used with:
Camera