1. Home
  2. Knowledge Base
  3. Hardware
  4. Licensing
  5. How to Register the Kiosk Software & What Ports/Websites You Need Connection To

How to Register the Kiosk Software & What Ports/Websites You Need Connection To

Your EB-KIOSK-SW Software needs to be registered in order to license it.  If you are opening your Kiosk or other Workplace Software for the first time, click on Activate! to enter in your Install Key. You will find your install key in your original software download email sent after you signed up for a trial or purchased the base software.

Note: You must be connected to the Internet to activate your software or request a trial. If your kiosk or other software being installed does not have access to the internet, you allow it to reach the needed sites by making two firewall rules for the server IP:

  • Outbound on port 443 and 80 to remote address 207.36.22.65/28
  • Inbound on port 443 and 80 to remote address 207.36.22.65/28

then you can remove the rules afterwards. You can also validate you can hit the activation site: https://www.eioboard.com/ValidationService/ValidationService.asmx

v10/v11

If you have already been using your Kiosk (such as for an Workplace trial), login with the admin using the admin code (7282623), and click the Register button to put in your new key.

 Simply type in the install key that was provided to you and activate it to license your purchase. You are now able to use your new Workplace Kiosk!

Please contact Support if you do not know your install key

Was this article helpful?

Related Articles

Contents

Need Support?

Can't find the answer you're looking for?
Contact Support